DMP Series
Vertical Machining Centers
UNBEATABLE 2-FOR-1 MACHINING
Two spindles in a single VMC.
A lot of shops use two identical vertical machining centers and two operators to produce the exact same part. Well, no more. On top of its two factory-freeing spindles, the DMP Series is equipped with a W-axis for easier tool setup. Go from #WINNING to #TWINNING.
| X Axis Travel | 40.9" |
| Y Axis Travel | 20.5" |
| Z Axis Travel | 23.6" |
| W Axis Travel | 0.787" |
| X Axis Rapid Traverse | 1,572 ipm |
| Y Axis Rapid Traverse | 1,572 ipm |
| Z Axis Rapid Traverse | 1,417 ipm |
| Cutting Feedrate | .04 - 590 ipm |
| Table Length | 47.2" |
| Table Width | 20.5" |
| Maximum Table Capacity | 1,760 lb |
| Number of Tools STD | 2 x 24 |
| Spindle Taper | CAT40 |
| Spindle Power | 12 / 20 hp |
| Spindle RPM | 8,000 RPM |
| Spindle Torque | 210 ft-lb |
| Distance Between Spindles | 15.7" |
| Spindle Taper | CAT40 |
| Spindle Power | 14.8 / 24.8 hp |
| Spindle RPM | 12,000 RPM |
| Spindle Torque | 87 ft-lb |
| Distance Between Spindles | 15.7" |
| Height | 138.2" |
| Length | 92.7" |
| Width | 108.7" |
TWO GLORIOUS SPINDLES
Ready to make chips fly for you.
Each of the DMP’s spindles is equipped with a dedicated 24-tool magazine with an optional 30 or 40 tools. We can’t emphasize enough how great it is for your bottom line to machine two identical parts simultaneously on the same machine.
SAVINGS ALL OVER THE PLACE
It’s not just space and time you’ll save.
You already know the DMP Series gives you some square footage back and (potentially) one whole operator. But by going from two machines to one, you’ll also save on expenses like coolant and electricity. Cha-ching.
