PUMA TT GL Series
Gantry Systems
A HIGHER PRODUCTION LEVEL
You’ll love the floor-friendly structure of the TT GL.
Robot loaders are typically found in front of the machine, but the overhead structure of the gantry on the PUMA TT GL means floor space is conserved. Once the TT GL is up and running for you, machine idle time will be a thing of the past.
|
|
Gantry Type |
|||
|
|
A1 |
A2 |
A3 |
A3E |
Gantry |
Construction |
Built-In |
|||
|
Control |
Fanuc CNC |
|||
|
Max Part Diameter |
7.87" (200 mm) |
|||
|
Max Part Length |
2.95" (75 mm) |
|||
|
Max Part Weight |
22 lb (10 kg) |
|||
|
Load Time (sec)* |
14 sec. |
|||
Work Stocker |
Number of Pallets |
14 |
14 |
14+14 |
14+14 |
|
Number of Elevators |
2 |
2 |
1+1 |
2+2 |
|
Location |
Left |
Right |
Left & Right |
Left & Right |
|
Min Part Diameter |
1.2" (30 mm) |
|||
|
Max Diameter |
7.87" (200 mm) |
|||
|
Min Part Length |
0.59" (15 mm) |
|||
|
Stack Height |
15.7" (400 mm) |
|||
STOCKER SPECS
Details on the TT GL work stocker:
Doosan work stockers come in 14-pallet stacks, and you can place them on the left of the PUMA TT GL, on the right or on both sides. The work stocker can handle a max diameter of 5.9" and has a stack height of 15.7".
TURN UP THE VOLUME
Stop wasting time.
If you produce high-volume parts in your shop and cycle time is critical, the PUMA TT GL is a no brainer for you. It happily handles the work you give it, and it gives a welcome boost to your productivity.
